Official Leagoo Z5c (Spreadtrum SC7731G) Stock Rom
DOWNLOAD - https://urluss.com/2tuwPM
Official Leagoo Z5c (Spreadtrum SC7731G) Stock Rom
If you are looking for the official stock firmware for your Leagoo Z5c device, you have come to the right place. In this article, we will provide you with the download link, flash tool, USB driver, and a step-by-step guide on how to install the stock ROM on your Leagoo Z5c.
The Leagoo Z5c is a 3G smartphone that runs on Android 6.0 Marshmallow operating system. It features a 5-inch FWVGA display, a quad-core 1.3GHz processor, 1GB of RAM, 8GB of internal storage, a 5MP rear camera with dual-LED flash, a 2MP front camera, and a 2300mAh battery[^1^]. The device supports dual SIM cards and has a microSD card slot for memory expansion up to 32GB[^3^].
The stock firmware or ROM is the official software that comes pre-installed on your Leagoo Z5c device. It is also known as the factory firmware or the original firmware. Flashing or installing the stock firmware can help you fix various issues such as bootloop, software errors, IMEI problems, or dead issues on your device. It can also restore your device to its default settings and performance.
Download Official Leagoo Z5c Stock Firmware
Before you proceed to download and install the stock firmware on your Leagoo Z5c device, make sure you have backed up all your important data and files as they will be erased during the flashing process. You also need to have a Windows PC and a USB cable to connect your device to the PC.
The official Leagoo Z5c stock firmware is available in a zip file that contains the flash file, flash tool, USB driver, and how-to flash manual. You can download the firmware file from the link below:
Firmware name: Leagoo_Z5C_OS1.1_Lite_E_20170228.zip
File size: 755 MB
Download link: Click here [^2^]
How to Install Official Leagoo Z5c Stock Firmware
After downloading the firmware file, you need to extract it on your PC using a file extractor tool such as WinRAR or 7-Zip. You will get the following files:
Flash file: This is the main file that contains the system image of your device.
Flash tool: This is the software that will help you flash or install the firmware on your device. In this case, we will use the SPD Flash Tool.
USB driver: This is the software that will enable your PC to recognize and communicate with your device. In this case, we will use the Spreadtrum USB Driver.
How-to flash manual: This is a document that will guide you through the flashing process step by step.
To install the official Leagoo Z5c stock firmware on your device, follow these steps:
Install the Spreadtrum USB Driver on your PC by following the instructions in the how-to flash manual.
Launch the SPD Flash Tool by double-clicking on its executable file.
Click on Load Packet and browse to the folder where you extracted the firmware file. Select the flash file (.pac) and click Open.
Click on Start Downloading and connect your device to the PC using a USB cable while holding down the Volume Down button.
The flashing process will begin and you will see a progress bar on the screen. Wait until it reaches 100% and shows Passed.
Disconnect your device from the PC and reboot it.
Congratulations! You have successfully installed the official Leagoo Z5c stock firmware on your device. ec8f644aee